1.) TO INCREASE INTERNET BANDWIDTH...
just Click Start then Run and type "gpedit.msc" without quotes.This opens the group policy editor. Then go to:
Local Computer Policy
then Computer Configuration
then Administrative Templates then Network then QOS Packet Scheduler and then to Limit Reservable Bandwidth.
Double click on Limit Reservable bandwidth. It will say it is not configured, but the truth is under the 'Explain' tab i.e."By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."
So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20%......
----------------------------------------------------------
2.)TURN ON UR PC IN JUST 10 SECONDS........
so u wanna know how to turn the pc on in 10 seconds (may vary)here's what u have to do to turn ur pc on in 10 seconds
Click on the start button then press R it will take u to Run well go to run
n type Regedit
press enter
this will open Registery Editor
now look for the key
HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Contr ol\ContentIndex
now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer
You'll See The Result
------------------------------------------------------
3.)Go ahead, do this little trick to impress and amaze your friends
For Microsoft Windows XP.
Go to:
Start.
Control Panel.
Regional and Language Options.
Click the Customize button.
Select Time tag.
Highlight AM and type the name you want to display . Repeat with PM.
cliKl apply and than ok
----------------------------------------------------
4.)Bill Gates still doesn't know why it happens:
Try out yourself...
Open Microsoft Word and type
=rand(200,99)
and then HIT ENTER....see what happens.
it won't hurt ur system!!
--------------------------------------------------------
5.)You can lock any folder without using any software. Follow these steps.
1.Suppose you have a folder named abcd in D:\abcd.
2.In the same drive next to the folder create a new notepad file with the exact statement
ren abcd abcd.{21EC2020-3AEA-1069-A2DD-08002B30309D}
3.Now save this text file as loc.bat
4.Create another notepad file and type
ren abcd.{21EC2020-3AEA-1069-A2DD-08002B30309D} abcd
5.Save this as key.bat
6.Now there are two batch files . Double click loc.bat and your folder will change into Control Panel and its contents cannot be viewed .
7.To open the folder double click key.bat and you get back your original folder .
8?For more safety keep the key.bat in another location .Only for unlocking copy paste to the original location and double click .
------------------------------------------------------------
6.)Hidden Star Wars Movie in Windows XP
Microsoft has hidden a version of Star Wars done entirely with ASCII characters in the Windows XP operating system.But you must be connected to internet to view it.When online,go to start->run.Now type ' telnet towel.blinkenlights.nl ' without the single quotes.See it for yourself.
----------------------------------------------------------
7.)TO CHANGE THE NAME OF RECYCLEBIN....
open notepad and paste this following matter there and now save this as recyclebin.reg and now click on the created file and then click yes........now rename the recyclebin as u wish....
REGEDIT4
[HKEY_CLASSES_ROOT\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\ShellFolder]
"Attributes"=hex:50,01,00,20
"CallForAttributes"=dword:00000000
--------------------------------------------------------
8.)Removing Multiple Boot Screens:
If you are getting unwanted multiple boot screen
Then Follow these Steps.
1> Right Click on My Computer
2>Select Properties
3>Select Advanced Tab
4>Select Settings In the Startup & Recovery Section(3rd grp)
5>Select the operating system which u want.
6>And Click OK.
7>Further again press the setting and click on Edit.
8>It will open boot.ini File.
9>Now u can delete those o/s which you don't want to be displayed.
Note: For deleting operating systems from boot.ini file, keep it mind that you can't
delete that o/s which is selected by default there. Before
making any changes make a copy of boot.ini file.
------------------------------------------------------------
9.)To Increase the Internet Speed:
Open Notepad and paste the below code in it.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
"SackOpts"=dword:00000001
"TcpWindowSize"=dword:0005ae4c
"Tcp1323Opts"=dword:00000003
"DefaultTTL"=dword:00000040
"EnablePMTUBHDetect"=dword:00000000
"EnablePMTUDiscovery"=dword:00000001
"GlobalMaxTcpWindowSize"=dword:0005ae4c
Now save this file as speed.reg. Execute it and observe the change!
-----------------------------------------------------------
10.)Use system restore when you cannot boot your system
If your system has failed to the point where you cannot access the Windows GUI either through booting normally or through safe mode, you
may still have the chance to use the System Restore feature if you have it enabled, by running it form the command prompt. To do this:
Restart your computer and press F8 after the POST screen to bring up the Windows XP boot menu. Choose 'boot in safe mode with command
prompt.'
If your system gets to the command prompt successfully, type '%systemroot%\system32\restore\rstrui.exe' and then press enter. Follow the
onscreen instructions to restore your computer to a previous saved point.
--------------------------------------------------------
11.)Change your windows font...
-first right clcik on your desktop ,go to properties
-den go to the appearnce tab and select advanced
-den scroll down to the part icon
-you can change your windows font there...
--------------------------------------------------------
12.)Hide Hard Drives Partitions(C:,D:,E: etc.)
This is a great trick you can play on your friends. To disable the display of local or networked drives when you click My Computer.
1.Go to start->run.Type regedit.Now go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Now in the right pane create a new DWORD item and name it NoDrives(it is case sensitive). Now modify it's value and set it to 3FFFFFF
(Hexadecimal) .Now restart your computer. So, now when you click on My Computer, no drives will be shown(all gone...). To enable display of
drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again.
Magic.
------------------------------------------------------------
13.)GETTING BACK MISSING FOLDER OPTIONS
Open Run and then type "gpedit.msc".
Now goto User Configuration > Administrative templates > Windows Component > Windows Explorer.
Click on Windows Explorer you will find the 3rd option on the right side of screen "Removes the Folder Option menu item from the Tools
menu"
Just check it, if it is not configured then change it to enable by double clicking on it and after applying again set it to not configured.
I hopes that you will find the option after restarting windows.
----------------------------------------------------------
14.)Make ur Windows Genuine using notepad!!!!
1. Copy and Paste the following code in the Notepad.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WPAEvents]
"OOBETimer"=hex:ff,d5,71,d6,8b,6a,8d,6f,d5,33,93,fd
"LastWPAEventLogged"=hex5,07,05,00,06,00,07,00,0f,00,38,00,24,00,fd,02
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"CurrentBuild"="1.511.1 () (Obsolete data - do not use)"
"InstallDate"=dword:427cdd95
"ProductId"="69831-640-1780577-45389"
"DigitalProductId"=hex:a4,00,00,00,03,00,00,00,36,39,38,33,31,2d,36,34,30,2d,\
31,37,38,30,35,37,37,2d,34,35,33,38,39,00,5a,00,00,00,41,32,32,2d,30,30,30,\
30,31,00,00,00,00,00,00,00,00,0d,04,89,b2,15,1b,c4,ee,62,4f,e6,64,6f,01,00,\
00,00,00,00,27,ed,85,43,a2,20,01,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,31,34,35,30,34,00,00,00,00,00,00,00,ce,0e,\
00,00,12,42,15,a0,00,08,00,00,87,01,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,94,a2,b3,ac
"LicenseInfo"=hex:9e,bf,09,d0,3a,76,a5,27,bb,f2,da,88,58,ce,58,e9,05,6b,0b,82,\
c3,74,ab,42,0d,fb,ee,c3,ea,57,d0,9d,67,a5,3d,6e,42,0d,60,c0,1a,70,24,46,16,\
0a,0a,ce,0d,b8,27,4a,46,53,f3,17
2. Save the file with the .reg extension.
3. If you run the file means it will ask you the confirmation to add the value to your Registry.
4. Press Yes.
5. Reboot your System.
6. Start Downloading from Microsoft Site.
----------------------------------------------------------
15.)Disabling Balloon Tips:
1. Start Regedit
2. Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\
3. Create a DWORD value of EnableBalloonTips
4. Give it a value of 0
enjoy................
--------------------
16. how to enable the rask manager
type: regedit in RUN
Hive: HKEY_CURRENT_USER
Key: Software\Microsoft\Windows\CurrentVersion\Policies\System
Name: DisableTaskMgr
Type: REG_DWORD
Value: 1=Enablethis key, that is DISABLE TaskManager
Value: 0isablethis key, that is Don't Disable, Enable TaskManager
just Click Start then Run and type "gpedit.msc" without quotes.This opens the group policy editor. Then go to:
Local Computer Policy
then Computer Configuration
then Administrative Templates then Network then QOS Packet Scheduler and then to Limit Reservable Bandwidth.
Double click on Limit Reservable bandwidth. It will say it is not configured, but the truth is under the 'Explain' tab i.e."By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."
So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20%......
----------------------------------------------------------
2.)TURN ON UR PC IN JUST 10 SECONDS........
so u wanna know how to turn the pc on in 10 seconds (may vary)here's what u have to do to turn ur pc on in 10 seconds
Click on the start button then press R it will take u to Run well go to run
n type Regedit
press enter
this will open Registery Editor
now look for the key
HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Contr ol\ContentIndex
now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer
You'll See The Result
------------------------------------------------------
3.)Go ahead, do this little trick to impress and amaze your friends
For Microsoft Windows XP.
Go to:
Start.
Control Panel.
Regional and Language Options.
Click the Customize button.
Select Time tag.
Highlight AM and type the name you want to display . Repeat with PM.
cliKl apply and than ok
----------------------------------------------------
4.)Bill Gates still doesn't know why it happens:
Try out yourself...
Open Microsoft Word and type
=rand(200,99)
and then HIT ENTER....see what happens.
it won't hurt ur system!!
--------------------------------------------------------
5.)You can lock any folder without using any software. Follow these steps.
1.Suppose you have a folder named abcd in D:\abcd.
2.In the same drive next to the folder create a new notepad file with the exact statement
ren abcd abcd.{21EC2020-3AEA-1069-A2DD-08002B30309D}
3.Now save this text file as loc.bat
4.Create another notepad file and type
ren abcd.{21EC2020-3AEA-1069-A2DD-08002B30309D} abcd
5.Save this as key.bat
6.Now there are two batch files . Double click loc.bat and your folder will change into Control Panel and its contents cannot be viewed .
7.To open the folder double click key.bat and you get back your original folder .
8?For more safety keep the key.bat in another location .Only for unlocking copy paste to the original location and double click .
------------------------------------------------------------
6.)Hidden Star Wars Movie in Windows XP
Microsoft has hidden a version of Star Wars done entirely with ASCII characters in the Windows XP operating system.But you must be connected to internet to view it.When online,go to start->run.Now type ' telnet towel.blinkenlights.nl ' without the single quotes.See it for yourself.
----------------------------------------------------------
7.)TO CHANGE THE NAME OF RECYCLEBIN....
open notepad and paste this following matter there and now save this as recyclebin.reg and now click on the created file and then click yes........now rename the recyclebin as u wish....
REGEDIT4
[HKEY_CLASSES_ROOT\CLSID\{645FF040-5081-101B-9F08-00AA002F954E}\ShellFolder]
"Attributes"=hex:50,01,00,20
"CallForAttributes"=dword:00000000
--------------------------------------------------------
8.)Removing Multiple Boot Screens:
If you are getting unwanted multiple boot screen
Then Follow these Steps.
1> Right Click on My Computer
2>Select Properties
3>Select Advanced Tab
4>Select Settings In the Startup & Recovery Section(3rd grp)
5>Select the operating system which u want.
6>And Click OK.
7>Further again press the setting and click on Edit.
8>It will open boot.ini File.
9>Now u can delete those o/s which you don't want to be displayed.
Note: For deleting operating systems from boot.ini file, keep it mind that you can't
delete that o/s which is selected by default there. Before
making any changes make a copy of boot.ini file.
------------------------------------------------------------
9.)To Increase the Internet Speed:
Open Notepad and paste the below code in it.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
"SackOpts"=dword:00000001
"TcpWindowSize"=dword:0005ae4c
"Tcp1323Opts"=dword:00000003
"DefaultTTL"=dword:00000040
"EnablePMTUBHDetect"=dword:00000000
"EnablePMTUDiscovery"=dword:00000001
"GlobalMaxTcpWindowSize"=dword:0005ae4c
Now save this file as speed.reg. Execute it and observe the change!
-----------------------------------------------------------
10.)Use system restore when you cannot boot your system
If your system has failed to the point where you cannot access the Windows GUI either through booting normally or through safe mode, you
may still have the chance to use the System Restore feature if you have it enabled, by running it form the command prompt. To do this:
Restart your computer and press F8 after the POST screen to bring up the Windows XP boot menu. Choose 'boot in safe mode with command
prompt.'
If your system gets to the command prompt successfully, type '%systemroot%\system32\restore\rstrui.exe' and then press enter. Follow the
onscreen instructions to restore your computer to a previous saved point.
--------------------------------------------------------
11.)Change your windows font...
-first right clcik on your desktop ,go to properties
-den go to the appearnce tab and select advanced
-den scroll down to the part icon
-you can change your windows font there...
--------------------------------------------------------
12.)Hide Hard Drives Partitions(C:,D:,E: etc.)
This is a great trick you can play on your friends. To disable the display of local or networked drives when you click My Computer.
1.Go to start->run.Type regedit.Now go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Now in the right pane create a new DWORD item and name it NoDrives(it is case sensitive). Now modify it's value and set it to 3FFFFFF
(Hexadecimal) .Now restart your computer. So, now when you click on My Computer, no drives will be shown(all gone...). To enable display of
drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again.
Magic.
------------------------------------------------------------
13.)GETTING BACK MISSING FOLDER OPTIONS
Open Run and then type "gpedit.msc".
Now goto User Configuration > Administrative templates > Windows Component > Windows Explorer.
Click on Windows Explorer you will find the 3rd option on the right side of screen "Removes the Folder Option menu item from the Tools
menu"
Just check it, if it is not configured then change it to enable by double clicking on it and after applying again set it to not configured.
I hopes that you will find the option after restarting windows.
----------------------------------------------------------
14.)Make ur Windows Genuine using notepad!!!!
1. Copy and Paste the following code in the Notepad.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WPAEvents]
"OOBETimer"=hex:ff,d5,71,d6,8b,6a,8d,6f,d5,33,93,fd
"LastWPAEventLogged"=hex5,07,05,00,06,00,07,00,0f,00,38,00,24,00,fd,02
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"CurrentBuild"="1.511.1 () (Obsolete data - do not use)"
"InstallDate"=dword:427cdd95
"ProductId"="69831-640-1780577-45389"
"DigitalProductId"=hex:a4,00,00,00,03,00,00,00,36,39,38,33,31,2d,36,34,30,2d,\
31,37,38,30,35,37,37,2d,34,35,33,38,39,00,5a,00,00,00,41,32,32,2d,30,30,30,\
30,31,00,00,00,00,00,00,00,00,0d,04,89,b2,15,1b,c4,ee,62,4f,e6,64,6f,01,00,\
00,00,00,00,27,ed,85,43,a2,20,01,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,31,34,35,30,34,00,00,00,00,00,00,00,ce,0e,\
00,00,12,42,15,a0,00,08,00,00,87,01,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,94,a2,b3,ac
"LicenseInfo"=hex:9e,bf,09,d0,3a,76,a5,27,bb,f2,da,88,58,ce,58,e9,05,6b,0b,82,\
c3,74,ab,42,0d,fb,ee,c3,ea,57,d0,9d,67,a5,3d,6e,42,0d,60,c0,1a,70,24,46,16,\
0a,0a,ce,0d,b8,27,4a,46,53,f3,17
2. Save the file with the .reg extension.
3. If you run the file means it will ask you the confirmation to add the value to your Registry.
4. Press Yes.
5. Reboot your System.
6. Start Downloading from Microsoft Site.
----------------------------------------------------------
15.)Disabling Balloon Tips:
1. Start Regedit
2. Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\
3. Create a DWORD value of EnableBalloonTips
4. Give it a value of 0
enjoy................
--------------------
16. how to enable the rask manager
type: regedit in RUN
Hive: HKEY_CURRENT_USER
Key: Software\Microsoft\Windows\CurrentVersion\Policies\System
Name: DisableTaskMgr
Type: REG_DWORD
Value: 1=Enablethis key, that is DISABLE TaskManager
Value: 0isablethis key, that is Don't Disable, Enable TaskManager
No comments:
Post a Comment